Tamiya 54149 Option Parts DB01 Alu.Racing Steering(Blue) (Updated at 2009/11/04 19:32)

Tamiya 58395 Off Road Electric DB01 Durga

Since it's release last year, Tamiya's TRF501X has enjoyed many competition successes, including winning the recent European Championships in Finland. The experience gained through the development of the TRF501X is now available to fans around the world in the form of this much-anticipated R/C off-road buggy, Durga.

Regarding ITEM 51304 DB01 Dish Wheels (Front) Attachment

These Spare Part wheels for the DB01 Durga are the same as those used for the race-spec TRF501X. Therefore they use a different type of hex hub attachment than previous chassis like the DF-03. This hex hub provides a close fit for precise wheel attachment, ensuring reliable off-road performance.

In cases where the hub and wheel fit is tight, take greater care when aligning the hex hub with the hex-shaped recess of the wheel and secure using lock nut.

About the Model
All-new DB01 chassis locates heavy components such as battery and motor near the center for optimum weight distribution.
Race-proven and reliable 2-belt driven 4WD system is completely enclosed with ABS resin covers to prevent dirt and debris from interfering with drivetrain operations.
Chassis features integrated bulkheads, which reduces the number of parts and simplifies maintenance.
Tough ABS resin 4-wheel double wishbone suspension system features the same configuration as the TRF501X and provides a wide range of settings options.
Brand new buggy body with rear wing is made from lightweight polycarbonate material.
Wheels, tires, and Type 540 motor are included.
2-channel transmitter, ESC, running battery & charger are separately required.


How to get Tamiya 58395 Off Road Electric DB01 Durga? Click here!

Tamiya 54190 Option Parts DF-03Ra Carbon R Damper Stay

Fine-tune your DF-03Ra with this new carbon rear damper stay set. The damper stay set creates greater durability and offers additional damper stay attachment positions. This option part is made with durable, lightweight carbon fiber and the damper stay mounts are produced with blue aluminum. The damper stay and mount provide you with additional strength to cope with the rigors of on-road and off-road driving.

Specs & Features
Carbon Rear Damper Stay x 1pc.
Aluminum Damper stay mount x 2pcs. (Blue)
6.5x3.05x1.0mm spacer x 2pcs. (Blue)
3x8mm Screws x 8pcs.
3x10mm Screws x 4pcs.
5mm Ball Connector x 2pcs.
5mm Ball Connector Nut x 2pcs.
5x23.5mm Ball Connector x 2pcs.
Can only be used with DF-03Ra kits.


How to get Tamiya 54190 Option Parts DF-03Ra Carbon R Damper Stay? Click here!

Tamiya 54189 Option Parts DF-03Ra Carbon F Damper Stay

Fine-tune your DF-03Ra with this new carbon front damper stay set. The damper stay set creates greater durability and offers additional damper stay attachment positions. This option part is made with durable, lightweight carbon fiber and the damper stay mounts are produced with blue aluminum. The damper stay and mount provide you with additional strength to cope with the rigors of on-road and off-road driving.

Specs & Features
Carbon Front Damper Stay x 1pc.
Aluminum Damper stay mount x 2pcs. (Blue)
Carbon Damper Stay Setting Spacer Set (from Item 53873) x 2pcs. (Blue)
6.5x3.05x1.0mm spacer x 2pcs. (Blue)
Screws and nuts included.
Can only be used with DF-03Ra machines.


How to get Tamiya 54189 Option Parts DF-03Ra Carbon F Damper Stay? Click here!

Tamiya 54177 Option Parts M-05 Alu. Front Upright

Compatible Chassis or Parts: M-05?M-03?M-04

How to get Tamiya 54177 Option Parts M-05 Alu. Front Upright? Click here!

Tamiya 53259 Option Parts F-1 3.5mm Offest Upright

Compatible Chassis or Parts: F103

How to get Tamiya 53259 Option Parts F-1 3.5mm Offest Upright? Click here!

Tamiya 53175 Bodies Friction Damper Grease (Med)

Compatible Chassis or Parts: TA05 ver.II?TA05-IFS?TA05?TB-03?DF-03Ra?TT-01?TT-01 TYPE-E

How to get Tamiya 53175 Bodies Friction Damper Grease (Med)? Click here!

Tamiya 51394 Spare Parts M-Chassis 11-S Racing Wheel*4

Compatible Chassis or Parts: M03?M04?M-05?M-05PRO

How to get Tamiya 51394 Spare Parts M-Chassis 11-S Racing Wheel*4? Click here!

Tamiya 51055 Spare Parts TRF415 Ball Diff Pulley 35T

Compatible Chassis or Parts: TRF 415

How to get Tamiya 51055 Spare Parts TRF415 Ball Diff Pulley 35T? Click here!

Tamiya 50788 Spare Parts TGX Upper Deck Set

Tamiya 50788 Spare Parts TGX Upper Deck Set

How to get Tamiya 50788 Spare Parts TGX Upper Deck Set? Click here!

Tamiya 50736 Spare Parts B Part (Upright)

Compatible Chassis or Parts: TL-01, FF02

How to get Tamiya 50736 Spare Parts B Part (Upright)? Click here!

Tamiya 58442 1/10 Electric Car Hatsune Miku Z4 (TT01E)

Anime characters have become a popular trend worldwide and recently in sports. The Super GT300 Series, Team Studie GLAD Racing's BMW Z4 incorporated the anime trend into their paint scheme. The vehicle features the characters from a popular Vocaloid Series of Japanese Anime.

1/10 R/C assembly kit of the Hatsune Miku Studie GLAD BMW Z4.
This model features the livery seen at the 2009 Super GT opening race at Okayama.
Polycarbonate body of the BMW Z4.
Includes side mirrors, rear wing, and metal-plated light cases.
Shaft driven 4-wheel drive TT-01 Type-E chassis.
Comes with slick tires snf BBS style mesh wheels.
2 red and 2 yellow 5mm LEDs and LED Light Control Unit TLU-01 (Item 53909) included.
TEU-101BK ESC and type 540 motor included.
2-channel R/C system, battery pack & charger are separately required.
Add the separately available LED Light Control Unit TLU-02 (Item 53937) to allow control of up to 16 pairs of LEDs (total 32 LEDs).
A wide variety of Option Parts are available.


How to get Tamiya 58442 1/10 Electric Car Hatsune Miku Z4 (TT01E)? Click here!

Tamiya 58444 1/10 RC M-Chassis Electric Abarth 500 Assetto Corse

The Abarth 500 Assetto Corse is the 2nd body variation released on the M-05 chassis. Based on the popular Fiat 500, the Abarth features a turbo charged engine with 197hp, lightweight aluminum wheels, racing mirrors and a spoiler. The RC version is a front wheel drive easy to assemble kit that is also easy to drive.

Specs & Features
1/10 R/C assembly kit of the Abarth 500 Assetto Corse.
Length: 365mm Width: 170mm Height: 142mm Wheelbase: 225mm (Middle wheelbase).
The sporty form of the Abarth 500 comes precisely reproduced with a polycarbonate body and is loaded on the new M-05 chassis.
Side mirrors and rear wing included.
Polycarbonate light case parts allow installation of separately available LED lights.
The servo, receiver, and ESC are mounted on the rear of the newly designed monocoque frame for better weight distribution and a lower center of gravity.
The 3-piece tie-rod steering linkage offers sharp cornering performance.
Sticker sheet with chrome-effect stickers included.
TEU-104BK ESC and type 540 motor included.
2-channel R/C system, battery pack & charger are separately required.


How to get Tamiya 58444 1/10 RC M-Chassis Electric Abarth 500 Assetto Corse? Click here!

Tamiya 57797 1/10 XB - Expert Built XB Racing Lancer

The full size Racing Lancer is part of Mitsubishi Motorsport's rally racing line up. This vehicle was designed specifically for the 2009 Dakar Series and other endurance events. The Lancer features a new body and chassis than the Pajero. It features a multi-tubular chassis, 260hp 3-liter turbo diesel engine and carbon fiber body. Although Mitsubishi Motorsports did not win the Dakar Series, team driver Joan 'Nani' Roma from Spain drove his car to a 10th place finish. The Tamiya Ready to Run car faithfully represents its full size counterpart with a polycarbonate body and durable 4wd chassis.

Specs & Features
Ready-to-Run 1/10 R/C model of the Team Repsol Mitsubishi Ralliart Racing Lancer.
Polycarbonate shell.
Front & Rear light case, mirrors, snorkel duct, and the duct securing cap are all precisely reproduced and are made of durable ABS resin.
Rubber tires with new tread pattern come on gun metal black wheels.
Fully-enclosed F/R gearboxes are equipped with differential gears for smooth cornering.
4-wheel double wishbone suspension features oil dampers.
2 white and 2 red 5mm LEDs and LED Light Unit TLU-01 (Item 53909) are included.
Connect separately available Tamiya LED Light Unit (TLU-02) (Item 53397) to enable control over realistic led light actions such as braking, turn signals, and passing lights.
2-channel R/C system, ESC, and type 540 motor included.
Battery pack & charger are separately required.
DF-01 Chassis


How to get Tamiya 57797 1/10 XB - Expert Built XB Racing Lancer? Click here!

Tamiya 57796 1/10 XB - Expert Built XB Super Levant

The Super Levant improves on the existing R/C Levant by offering more power, speed and excitement. This vehicle is ready to run out of the box and ready to rampage across any terrain.

Specs & Features
Ready-to-Run 1/10 R/C model of the Super Levant.
Powerful Tamiya Brushless Motor 01 TBLM-01 8T included. Kv rating (rpm/volt) = 4410.
Tamiya Brushless ESC 01 TBLE-01 with DEANS ultra plug connector included.
The wheelbase is 23mm longer than the Levant (Item 57789) and the rear tires feature a 2 degree toe-in which greatly improves overall stability.
New sleek body design.
New metal-plated wheels are fitted with NDF-01 V-Tread Block Tires (Item 53854).
A slipper clutch is installed to protect the drive train from damage.
Features full ball bearings.
CVA Dampers included.
Finespec FM transmitter, TRU-05 receiver, & TSU-03 servo included.
Length: 430mm, Width: 296mm, Height: 151mm, Wheelbase: 303mm, Weight: 2005g, Tread (F/R): 245mm/247mm.
Battery pack & charger not included.


How to get Tamiya 57796 1/10 XB - Expert Built XB Super Levant? Click here!

Tamiya 56030 1/16 R/C Tank Series Russian KV-2 w/Option Kit

After the success of the 1/16 R/C Russian KV-1 tank, Tamiya has released a second Russian Tank, the 1/16 R/C KV-2. In November 1940, mass production of the KV-2 began. The KV-2 tank was part of a series of Soviet tanks named after defense commissar Kilment Voroshilov. The large stature of the KV-2 was needed to house its 3.25m large turret, 24-caliber 1938/40 152mm M-10 howitzer and ammunition. This tank could hold 36 shells of various types of ammunition, including a special armor-piercing shell to attack concrete pillboxes. On June 24th, 1941 the KV tanks faced the German 6th Panzer Division in Lithuania. The massive size of the KV and 75mm thick armor was difficult for the German force to penetrate. German soldiers called the KV tanks 'Ungeheuer{' (monster) and 'Gigant' (giant) because of their enormous size.

Specs & Features
1/16 R/C assembly kit of the Russian Heavy Tank KV-2.
Length: 443mm, Width: 210mm, Height: 205mm, Total Weight: 3,600g.
The KV-2's large hexagonal turret and hull details have been accurately reproduced.
Digitally recorded sounds: manually operated turret rotation, gun barrel elevation and depression, tracks and engine.
Includes DMD Control Unit (T-08) and DMD Multi-Function Unit (MF-06) which enable turret rotation, gun elevation/depression, and realistic light, sound, and vibration actions.
Turret can rotate a full 360 degrees while the main gun features a 4 degree depression to 14 degrees elevation range of movement.
Precision-made turned aluminum barrel accurately reproduces the muzzle step on the barrel of the 20 caliber M10 152mm gun.
Photo-etched parts to depict radiator grilles.
Rear mounted, pre-assembled gearbox with two type 380 motors.
Metal parts: lower hull, suspension arms, and drive sprockets.
Requires 4-channel transmitter with self-neutral function (Futaba Attack T4VWD is recommended), battery pack, and eight R6/AA/UM3 batteries for transmitter.
Separately available Battle System (Item 53447) enjoy 1 vs 1 or team tank battles with other Tamiya 1/16 R/C tanks.


How to get Tamiya 56030 1/16 R/C Tank Series Russian KV-2 w/Option Kit? Click here!

Tamiya 51360 Bodies Racing Lancer Body

Polycarbonate body captures the Racing Lancer.
Set includes precisely reproduced F/R light cases, mirrors, snorkel duct, and the duct securing cap (J Parts) and are made of durable ABS resin.
Wheelbase: 280mm Tread: F/R 202mm.
Fits CC-01.


How to get Tamiya 51360 Bodies Racing Lancer Body? Click here!

Tamiya 58333 1/10 Electric Car Impreza WRC 2004 (TT-01)

Basic Specifications
Overall length: 441mm
Overall width: 185mm
Overall height: 145mm
Wheelbase: 257mm
Transmission Type: Longitudinally mounted motor with shaft-drive 4WD Chassis frame material: ABS
Suspension: Double Wishbone (Front & Rear)
Accurately shaped polycarbonate body of the 2004 Subaru Impreza on the lightweight easy to assemble TT-01 chassis.
4WD shaft driven bathtub chassis with 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox.
Powered by a Type 540 motor.
Kit includes gold wheels, radial tires and TEU-101BK ESC
Loads of grade-up parts available (sold separately) allowing the TT-01 to match your R/C experience and knowledge.

The Subaru Impreza that displayed formidable speed and perfect consistency throughout the 2004 WRC season now makes its way to our 1/10 scale TT-01 chassis line-up. With accurately reproduced rearview mirrors, sectioned rear wing and polycarbonate body shell, the kit features all necessary markings for the 2004 Rally Mexico. The high performance, easy to assemble 4WD shaft-driven TT-01 chassis will make you feel like a real WRC driver.

About the 2004 Subaru Impreza
Taking advantage of new regulations, the 2004 Impreza features loads of improvements to the body, engine, suspension and aerodynamic design. The rear wing has been redesigned for improved aerodynamic performance and the flat horizontally opposed engine has been refined for more power. Making its debut in Mexico in round 3, the 2004 Impreza performed well in its first outing leading for most of the round until suffering a 5-minute penalty. 2003 Champion Petter Solberg has since been able to steer the Impreza to victories on the smooth gravel of New Zealand and the rough terrain of Greece, proving the new Impreza impresses on all surfaces. Currently second in the Drivers Championship, Solberg is chasing back-toback Championships.

Lightweight & Perfectly Balanced
The longitudinally placed motor allows reliable power transfer through a shaft-driven 4WD transmission. Drive train and battery are loaded flat in the bathtub chassis for a low center of gravity, giving you a perfectly balanced chassis. 4-wheel double wishbone suspension combines with front and rear diff gear to ensure consistent handling and excellent cornering performance. The overall chassis has been designed for easy assembly and maintenance making it perfect for those new to the world of R/C cars.

Required Items (Sold Separately)
R/C Unit: Expec GT-I or 2-channel R/C unit with ESC
Battery: Tamiya 7.2V Racing Pack or equivalent


How to get Tamiya 58333 1/10 Electric Car Impreza WRC 2004 (TT-01)? Click here!

Tamiya 54179 Option Parts M-05 Ball Bearing Set

Can be used with M-05 chassis machines.
850 Ball bearings x 6pcs.
1150 Ball bearings x 12pcs.


How to get Tamiya 54179 Option Parts M-05 Ball Bearing Set? Click here!

Tamiya 54180 Option Parts M-05 Titan. Screw Set

Can be used with M-05 chassis machines.
3x8mm Screw x 6pcs.
3x10mm Screw x 36pcs.
3x12mm Screw x 5pcs.
3x15mm Screw x 10pcs.
3x6mm Countersunk Screw x 4pcs.
3x8mm Countersunk Screw x 1pc.
3x16mm Countersunk Screw x 1pc.


How to get Tamiya 54180 Option Parts M-05 Titan. Screw Set? Click here!

Tamiya 54178 Option Parts M-05 Alu. Rear Upright

Can be used with M-05, M-03, & M-04 chassis machines.
Not only do they look excellent as dress up parts, but they also provide your machine with extra weight savings.
Requires separately available 1050 Ball Bearings (4pcs.) (Item 51239).


How to get Tamiya 54178 Option Parts M-05 Alu. Rear Upright? Click here!

Tamiya 54168 Option Parts F104 Sponge Tires B (4435,Rear)

Sponge tires X 2pcs.
Tire inner diameter: 44mm, Tire width: 35mm.
These tires have a harder composition in comparison with Spare Parts Item 51385 F104Sponge Tires B (4435, Rear, Standard).


How to get Tamiya 54168 Option Parts F104 Sponge Tires B (4435,Rear)? Click here!

Tamiya 53651 Option Parts TRF Nut Driver (7.0mm)

Tamiya 53651 Option Parts TRF Nut Driver (7.0mm)

How to get Tamiya 53651 Option Parts TRF Nut Driver (7.0mm)? Click here!

Tamiya 53646 Option Parts Wheel Space/Blue

One set of 0.5 thickness 4 pieces and 1mm thickness 4 pieces

How to get Tamiya 53646 Option Parts Wheel Space/Blue? Click here!

Tamiya 53029 Option Parts 1150 SEALED BALL BEARING

Reduce friction and increase run time with precision rubber sealed 5x11 ball bearings. The TLT-1 requires 20 bearings. Set includes 2 bearings.

How to get Tamiya 53029 Option Parts 1150 SEALED BALL BEARING? Click here!

Tamiya 53030 Option Parts 850 SEALED BALL BEARING

These 5x8 rubber sealed bearings replace the brass bushings in the cantilever arm for smooth suspension movement. The TLT-1 requires 8 bearings. Set includes 4 bearings.

How to get Tamiya 53030 Option Parts 850 SEALED BALL BEARING? Click here!

Tamiya 53126 Option Parts 1150 Sealed Ball Bearing*2

Tamiya 53126 Option Parts 1150 Sealed Ball Bearing*2

How to get Tamiya 53126 Option Parts 1150 Sealed Ball Bearing*2? Click here!

Tamiya 53132 Option Parts Flu. Color Antenna Pipes *4

Tamiya 53132 Option Parts Flu. Color Antenna Pipes *4

How to get Tamiya 53132 Option Parts Flu. Color Antenna Pipes *4? Click here!

Tamiya 53008 Option Parts 1150 Sealed Ball Bearing

5x11 MM sealed ball bearing.

How to get Tamiya 53008 Option Parts 1150 Sealed Ball Bearing? Click here!

Tamiya 51263 Spare Parts Ferrari FXX Wheel(26mm/Off4)*4

Wheels included with TT-01 Ferrari FXX are now available as spare parts. Offset 4mm wheels are also expected to fill a demand for wide-tread compatible wheels, which are lacking on the market. these wheels are 26mm wide.
*Compatible with TT-01 chassis.


How to get Tamiya 51263 Spare Parts Ferrari FXX Wheel(26mm/Off4)*4? Click here!

Tamiya 51254 Spare Parts TB Evo 5 L Parts (Gear Cover)

Compatible Chassis or Parts: TB Evolution 5

How to get Tamiya 51254 Spare Parts TB Evo 5 L Parts (Gear Cover)? Click here!

Tamiya 50582 Spare Parts 3x14mm Step Tapping Screw*5

Tamiya 50582 Spare Parts 3x14mm Step Tapping Screw*5

How to get Tamiya 50582 Spare Parts 3x14mm Step Tapping Screw*5? Click here!

Tamiya 50583 Spare Parts 3x15mm Tapping Screw*10

Tamiya 50583 Spare Parts 3x15mm Tapping Screw*10

How to get Tamiya 50583 Spare Parts 3x15mm Tapping Screw*10? Click here!

Tamiya 50586 Spare Parts 3mm Washer *15

Tamiya 50586 Spare Parts 3mm Washer *15

How to get Tamiya 50586 Spare Parts 3mm Washer *15? Click here!

Tamiya 50529 Spare Parts 4WD Plastic Gear

Compatible Chassis or Parts: TA02

How to get Tamiya 50529 Spare Parts 4WD Plastic Gear? Click here!

Tamiya 58441 Off Road Electric Buggy Champ 2009

The prominent figure of the R/C car boom was the Buggy Champ which was first released in 1979. Tamiya is now proud to re-release the Buggy Champ to celebrate the car's 30thyear anniversary. The chassis has been finely tuned while maintaining the original features of the chassis such as the unique front double trailing arms and rear torsion suspension.R/C fans' hearts will definitely race when they see the nostalgic form and relive the dynamic performance of this machine.

This is a 1/10 R/C assembly kit.
Length: 400mm-Full ball bearings.
ESC and type 540 motor included.

Comes loaded with many top quality parts for improved performance such as:
A duralumin plate reinforced 2mm thick FRP main frame.
Die-cast front and rear suspension arms, front axle, and wheel hubs have been newlydesigned for this re-release.
Clear transparent waterproof case protects the R/C mechanisms.
Reinforced front uprights.
Redesigned oil dampers.
Comes in the same original blister pack style packaging.
White plastic easy-to-paint body included.
Requires TS paints
Can be used with separately available LF1100-6.6V Racing Pack (Item 55105) which isspecifically made for this machine.

How to get Tamiya 58441 Off Road Electric Buggy Champ 2009? Click here!

Tamiya 57794 1/10 XB - Expert Built Electric XB Cusco Impreza(TT01E)

The 2008 Super GT championship race 4 and decorating classes at Sepang race showed a significant breakthrough in the GT300 class the only AWD car is a Tamiya electric CUSCO DUNLOP SUBARU IMPREZA completed. Has turned into a thrilling experience in race cars filled polycarbonate to four Doasedanbodi reproduced. Including a small mirror and a large rear wing, front bumper canards on both sides, attractive finish and high scale before and after light-plated case. 10-spoke wheels and was equipped with Reshingusurikkutaiya.

How to get Tamiya 57794 1/10 XB - Expert Built Electric XB Cusco Impreza(TT01E)? Click here!

Tamiya 51046 Spare Parts M-Narrow 18 Spoke Wheels

Compatible Chassis or Parts: OP412, OP433, OP482, SP 1023, 1049 Offset 0

How to get Tamiya 51046 Spare Parts M-Narrow 18 Spoke Wheels? Click here!

Tamiya 50977 Bodies Enzo Ferrari Body Part

Compatible Chassis or Parts: TA05, TB-02, TT-01, TA04, TL-01, TGS, TNS, TG10 Mk.1

How to get Tamiya 50977 Bodies Enzo Ferrari Body Part? Click here!

Tamiya 51376 Bodies Lancer Evo X Body

Polycarbonate shell captures the impressive form of the Evolution X.
Set provides a maximum of eight 5mm and six 3mm positions for you to illuminate your R/C car with lights.
H Parts (Mirror): White.
J Parts (Lightcase): Silver metal plated.
Screws & nuts, stickers and masking seals included.
Can be used with DF-03Ra and any standard wheelbase TT-01 chassis machines.

How to get Tamiya 51376 Bodies Lancer Evo X Body? Click here!

Tamiya 58421 Off Road Electric Racing Lancer(Tentative)

The first Lancer Evo, manufactured by Mitsubishi Motors, was released in 1992 for the Japanese market. Unexpectedly, the car became desired in other countries and was released to the United Kingdom and various European markets. In 2003, Mitsubishi began exporting the Evo VIII to the United States due to the American interest in similar cars such as the Subaru Impreza WRX.

Since the initial release of the Evolution I in 1992, Mitsubishi has released ten versions of the vehicle. The tenth generation Mitsubishi AWD sports car, the Lancer Evolution X, was released in Japan in October 2007. In 2008, the Lancer was approved by the FIA as a ""Group-N"" vehicle, which requires more than 1,000 units with four seats to be produced in a year. Since its development, the Lancer has become a highly competitive rally race car and earned the respect of many.

Specs
1/10 R/C assembly kit of the Mitsubishi Lancer Evolution X.
The DF-01 Suspension system has plenty of suspension stroke allowing dynamic driving on both on-road and off-road surfaces. Rally tires included.
Shaft driven 4WD chassis with horizontally mounted motor.
Features the proven DF-01 drive train with front and rear ball differentials.
CVA Damper Super Mini for front and rear suspensions.
2 types of rear suspension arms allow wheelbase adjustment, enabling the fitting of 251mm and 257mm wheelbase bodies.
Upper arms feature threaded shafts enabling camber angle adjustments.
ESC TEU-101BK and type 540 motor included.
The kit includes two spur gears (78T, 75T) and two pinion gears (29T, 32T) providing you with a choice of 4-gear ratios: 8.22:1, 7.90:1, 7.45:1, 7.16:1.
LED Light Unit not included.

How to get Tamiya 58421 Off Road Electric Racing Lancer(Tentative)? Click here!

Tamiya 58440 1/10 Electric Car Lancer Evo X (DF-03Ra)

After a full model change, the Mitsubishi Lancer Evolution X was unveiled to the world in2007. As well as being Mitsubishi s flagship model, the visually impressive Evo. X featured many new outstanding technological aspects which attracted much attention. The newly developed 2 liter 4 cylinder DOHC aluminum block turbo-charged engine provides great weight savings and thumps out 280ps and 43kg/m of torque. Also a first for Japanese cars,the Evo. X features a Twin Clutch SST automated manual transmission which allows a smooth and swift gear change, making driving more enjoyable. The sporty body also features a distinctive front end and a large rear wing.

This is a 1/10 R/C assembly kit of the Mitsubishi Lancer Evolution X.
Suspension system has plenty of suspension stroke allowing dynamic driving on both on-road and off-road surfaces. Rally tires included.
Shaft driven 4WD chassis with longitudinally mounted motor.
Features the proven DF-03 drive train with front and rear ball differentials and full ball bearings.
CVA Damper Super Mini for front and rear suspensions.
2 types of rear suspension arms allow wheelbase adjustment, enabling fitting of short wheelbase (251mm) bodies as well.
Upper arms feature threaded shafts enabling camber angle adjustments.
ESC and type 540 motor included.
Choice of 3-gear ratios: 8.22:1, 7.90:1, 7.45:1, 7.16:1
Includes two spur gears (78T, 75T) and two pinion gears (29T, 32T)
For an ultimate finish, paint your machine with PS Evolution Red (Item 89919).

Can be used with a variety of Option Parts, including:
53571 TRF Damper Set (Fluorine Coated) -53949 DF-03 Lightweight Battery Stopper Pin
53953 DF-03 Front One-Way Set
53931 DF-03 Center One-Way Set
53941 DF-03 Alu. Turnbuckle Steering Rod
53792 Assembly Universal Shaft
53924 DF-03 Heat Sink Bar Set
53948 DF-03 Alu. One-Piece Propeller Cup Joint
53925 DF-03 Slipper Clutch Set (Includes a 85T spur gear that can not be used.)

How to get Tamiya 58440 1/10 Electric Car Lancer Evo X (DF-03Ra)? Click here!

Tamiya 58437 1/10 Electric Car Lancer Evo X (TT01E)

After a full model change, the Mitsubishi Lancer Evolution X was unveiled to the world in2007. As well as being Mitsubishi s flagship model, the visually impressive Evo. X featured many new outstanding technological aspects which attracted much attention. The newly developed 2 liter 4 cylinder DOHC aluminum block turbo-charged engine provides great weight savings and thumps out 280ps and 43kg/m of torque. Also a first for Japanese cars, the Evo. X features a Twin Clutch SST automated manual transmission which allows a smooth and swift gear change, making driving more enjoyable. The sporty body also features a distinctive front end and a large rear wing.

This is a 1/10 scale R/C assembly model kit of the Mitsubishi Lancer Evolution X.
The polycarbonate body accurately captures the impressive form of the Evo. X.
Side mirrors, rear wing, and metal plated light cases are precisely reproduced.
Shaft driven 4-wheel drive TT-01 Type-E chassis gives this electric R/C car superior control and handling.
Silver 10-spoke wheels and tires with tread pattern are included.
2 white and 2 red 5mm LED lights (Total 4) are included.
The front light case has four 5mm and two 3mm LED Light installation points with the rear having four 5mm and four 3mm installation points.
Comes with LED Light Unit TLU-01 (Item 53909). *It is possible to assemble with the separately available LED Light Control Unit TLU-02 (Item 53937) which allows up to 16pairs of LEDs (total 32 LEDs) to be controlled.
ESC and type 540 motor included.
2-channel R/C system, battery pack & charger are separately required.
For the ultimate finish, paint your Evo. X with PS Evolution Red (Item 89919).
A wide variety of Option Parts are available for you to further customize your machine.

How to get Tamiya 58437 1/10 Electric Car Lancer Evo X (TT01E)? Click here!

Tamiya 54182 Option Parts M-05 Adjustable Upper Arm Set

The adjustable upper arm set allows you to adjust the camber and toe-in angles in your vehicle by using the different spacers included in the set.

Specs & Features
Can be used with M-03, M-04, & M-05 chassis machines.


How to get Tamiya 54182 Option Parts M-05 Adjustable Upper Arm Set? Click here!

Tamiya 54183 Option Parts M-Ch. Rein. Freewheel Axle Set

Compatible Chassis or Parts: M-05, M-03, M-04

How to get Tamiya 54183 Option Parts M-Ch. Rein. Freewheel Axle Set? Click here!

Tamiya 53643 Option Parts 5mm Aluminum Connector /Red

Tamiya 53643 Option Parts 5mm Aluminum Connector /Red

How to get Tamiya 53643 Option Parts 5mm Aluminum Connector /Red? Click here!

Tamiya 53535 Option Parts 3x10mm Titanium Countersunk Hex headScrew *5

Tamiya 53535 Option Parts 3x10mm Titanium Countersunk Hex headScrew *5

How to get Tamiya 53535 Option Parts 3x10mm Titanium Countersunk Hex headScrew *5? Click here!

Tamiya 53586 Option Parts f4mm Shim Set *10 x 3 types

10 pieces each of 0.1mm, 0.2mm, and 0.3mm thickness

How to get Tamiya 53586 Option Parts f4mm Shim Set *10 x 3 types? Click here!

Tamiya 53596 Option Parts Alu.Servo Stay (Short)

Compatible Chassis or Parts: TA03, TA04, TG10

How to get Tamiya 53596 Option Parts Alu.Servo Stay (Short)? Click here!

Tamiya 53534 Option Parts 3x8mm Titanium Countersunk Hex HeadScrew *5

Tamiya 53534 Option Parts 3x8mm Titanium Countersunk Hex HeadScrew *5

How to get Tamiya 53534 Option Parts 3x8mm Titanium Countersunk Hex HeadScrew *5? Click here!

Tamiya 51393 Spare Parts M-05 F Parts (Upright)

Compatible Chassis or Parts: M-05

How to get Tamiya 51393 Spare Parts M-05 F Parts (Upright)? Click here!

Tamiya 51389 Spare Parts M-05 A Parts (Chassis)

Compatible Chassis or Parts: M-05

How to get Tamiya 51389 Spare Parts M-05 A Parts (Chassis)? Click here!

Tamiya 51390 Spare Parts M-05 B Parts (Steering Wiper)

Compatible Chassis or Parts: M-05

How to get Tamiya 51390 Spare Parts M-05 B Parts (Steering Wiper)? Click here!

Tamiya 51391 Spare Parts M-05 C Parts (Sus. Arm)

Compatible Chassis or Parts: M-05

How to get Tamiya 51391 Spare Parts M-05 C Parts (Sus. Arm)? Click here!

Tamiya 50967 Spare Parts Beams Integra Wheels*4

Compatible Chassis or Parts: SP419, SP454, SP476, SP810, OP214, OP220, OP224, OP227, OP293, OP294

How to get Tamiya 50967 Spare Parts Beams Integra Wheels*4? Click here!

Tamiya 50503 Spare Parts F-1 Front Suspension Arm( B-PART)

Compatible Chassis or Parts: F103

How to get Tamiya 50503 Spare Parts F-1 Front Suspension Arm( B-PART)? Click here!

Tamiya 58438 1/10 RC M-Chassis Electric Mini Cooper Racing (M-05)

After 10 years since the release of the first M-series R/C car, Tamiya is now releasing the latest M-05 chassis with the popular Rover Mini Cooper racing version body.

This is a 1/10 R/C assembly kit.
Length: 315mm, Width: 167mm, Height: 135mm.
The very popular Mini Cooper Racing car comes loaded on the new M-05 chassis.
The servo, receiver, and ESC are mounted on the rear of the newly designed monocoque frame for better weight distribution and a lower center of gravity.
The 3-piece tie-rod steering linkage offers sharp cornering performance.
Sticker sheet included.
Includes 60D radial tires and silver Rover Mini Cooper wheels.
ESC and type 540 motor included.
2-channel R/C system, battery pack & charger are separately required.
A wide variety of Option Parts for M-05 chassis machines and bodies are already available for further customization.

How to get Tamiya 58438 1/10 RC M-Chassis Electric Mini Cooper Racing (M-05)? Click here!

Tamiya 58439 1/10 Electric Car Cusco Dunlop Impreza (TT-01E)

This 2008 Super GT300 entrant, the Cusco Dunlop Subaru Impreza comes on the fun to drive TT-01 Type-E chassis. Finishing the Super GT300 season in 6th from a field of 28entrants, the Impreza showed its prowess at the 4th Round in Sepang where it started from pole position and went on to claim the win. The Impreza also went on to record two more pole positions in the wet at Round 6 in Suzuka and at Round 9 in Fuji. The Impreza is powered by a Horizontally Opposed DOHC turbo charged 4-cylinder engine and is the only AWD race car in Super GT.

This is a 1/10 scale R/C assembly model kit of the Cusco Dunlop Subaru Impreza.
The polycarbonate body accurately captures the impressive form of the Impreza.
Side mirrors, rear wing, and metal plated light cases are precisely reproduced.
Shaft driven 4-wheel drive TT-01 Type-E chassis gives this electric R/C car superior control and handling.
Accurately reproduced wheels and tires with tread pattern are included.
2 white and 2 red 5mm LED lights (Total 4) are included.
The front light case has four 5mm and two 3mm LED Light installation points with the rear having four 5mm and four 3mm installation points.
Comes with LED Light Unit TLU-01 (Item 53909). *It is possible to assemble with the separately available LED Light Control Unit TLU-02 (Item 53937) which allows up to 16pairs of LEDs (total 32 LEDs) to be controlled.
ESC and type 540 motor included.
2-channel R/C system, battery pack & charger are separately required.
A wide variety of Option Parts are available for you to further customize your machine.

How to get Tamiya 58439 1/10 Electric Car Cusco Dunlop Impreza (TT-01E)? Click here!

Tamiya 58342 1/10 Electric Car Lancia Delta HF (TT-01)

First released on the TA01 chassis (Item #58113) more than 10 years ago, the Schnitzer BMW M3 Sport Evo is back, and better than ever on the high performance TT-01 chassis. The TT-01 is an easy to assemble lightweight chassis perfect for beginners. Featuring loads of separately available option parts, you can upgrade your TT-01 chassis to suit your developing R/C skills and knowledge.

About the Schnitzer BMW M3 Sport Evo Racing in the 1992 German Touring Car Championships, the BMW Schnitzer Team was touted as the strongest of the BMW works teams for 1992. Boasting a 2.5 litre 4-cylinder DOHC engine with 380hp output, the BMW M3 Sport Evo pushed the Mercedes-Benz 190 Evo 2 hard all season. In round 13, Joachim Winkelhock was finally able to snare a hard fought victory, finally getting the better of the 190. The M3 Sport Evo remains a classic racing machine loved by racing fans from all over the world.

About the model
Easy to assemble 4WD shaft driven bathtub TT-01 chassis.
Features Urethane Bumper M and new window stickers.
Driver figure and cockpit detailing featured in Item #58113 not included with kit.

How to get Tamiya 58342 1/10 Electric Car Lancia Delta HF (TT-01)? Click here!

Tamiya 58302 1/10 Electric Car TT01 Enzo Ferrari with ESC

About the Enzo Ferrari
September 2002, Ferrari officially introduced the all new Enzo Ferrari at the Paris Auto Show. The revolutionary all-carbon fiber body of this sports car, that has the same name as Ferrari's founder uses design elements from the Ferrari F1 cars with an elongated nose sprouting vertical blades that integrate with large air intakes. Drive-by-wire electronic speed control is capable of shifting in 0.15 seconds. The car features 6-liter V12 engine (called the type F140) capable of delivering over 650 horsepower, reaching 67kgm of torque, and propelling the car to speeds of over 350kph. The Enzo Ferrari was made with not only speed, but also with superior down force aerodynamics in mind, hence the addition of a retractable rear-wing that affords 775kg of down force at 300km. And as for speed control, this stable stallion is the first road car to be equipped with state-of-the-art carbon-ceramic brake discs. Deserving of the name of Ferrari's founder, and setting a new vision for the future is the Enzo Ferrari.

The easy to assemble shaft-driven 4WD TT-01 chassis The longitudinally placed motor allows reliable power transmission through a shaft-driven 4WD transmission. Mechanism and battery are loaded in the bathtub chassis in a flat position for greater stability. Low center of gravity and 4-wheel double wishbone suspension insure top control. The tightly sealed gearboxes feature differential gears that provide smooth cornering

Turn your model into a pure racer Many seperately available option parts can be mounted on the Enzo Ferrari TT-01 chassis such as full ball bearings and CVA Mini Shock Unit Cylinder. These parts will enhance the performance of your R/C car. Try your own original setting.

Basic Specifications
Total length: 457mm
Total width: 202mm
Total height: 110mm
Total width: 202mm
Clearance: 9mm
Weight Fully-Equipped: 1,490g (Measurement includes TP-S3003 servo, CPR Unit and RC2400SP Battery with RS-540 motor)
Wheelbase: 257mm
Tread F/R: 159/157mm
Chassis Shape: Bathtub
Steering Tie Rod: 3 part
Suspension: Front and Rear Double Wishbone
Caster Angle-F/R: 2deg/0deg
Camber Angle-F/R: 1deg/1deg
Toe Angle-F/R: 0deg/0deg
Damper: F/R Friction Damper
Transmission Type: Longitudinally placed motor with Shaft-Driven 4WD
Gear Ratio: 8.35:1 (standard in the kit)
Diff. gear system: F/R 3-Bevel Diff
Speed Controller: Electronic Speed Controller (CPR Unit)
Tire Width: F/R both 27mm
Tire Diameter: F/R both 65mm
Tread Pattern: F/R Racing Radial Type
Type 540 motor included

How to get Tamiya 58302 1/10 Electric Car TT01 Enzo Ferrari with ESC? Click here!

Tamiya 50985 Spare Parts TRF 414M F Part (Hub Carrier)

Compatible Chassis or Parts: TRF414, TA04-PRO, TA04-S, TA04-SS, TA04-R, TB-EVO.III

How to get Tamiya 50985 Spare Parts TRF 414M F Part (Hub Carrier)? Click here!

Tamiya 50875 Spare Parts 5mm Ball Connector (8 pcs)

Compatible Chassis or Parts: TA04.PRO, TA04, TB-EVO

How to get Tamiya 50875 Spare Parts 5mm Ball Connector (8 pcs)? Click here!

Tamiya 51392 Spare Parts M-05 D Parts (Damper Stay)

Compatible Chassis or Parts: M-05

How to get Tamiya 51392 Spare Parts M-05 D Parts (Damper Stay)? Click here!

Tamiya 50478 Spare Parts Skyline Spare Rear Gear Case

Compatible Chassis or Parts: TA01, TA02

How to get Tamiya 50478 Spare Parts Skyline Spare Rear Gear Case? Click here!

Tamiya 58409 1/10 Electric Car ARTA Garaiya (TB-03)

Autobacs Racing Team Aguri re-entered their modified ASL Garaiya in the GT300 class of the 2007 Japan Super GT series to commemorate the 10th anniversary of ARTA. With the veteran driver duo of Morio Nitta and Shinichi Takagi at the wheel, the team showed early promise to take 1st place at Round 3 Fuji Speedway, and went on to finish a respectable 4th place in the season's overall standings.

About the Model
The new TB-03 chassis is totally improved upon its predecessor the TB-02.
Bathtub frame comes with a motor cooling duct to improve heat dissipation for better performance.
In-board Front Suspension system features horizontally-mounted front dampers to enable a low-nose profile to mount the new-mold aerodynamic polycarbonate body shell.
The body shell is also compatible with TA05-IFS chassis
Newly-designed one-piece aluminum motor mount makes changing and adjusting gears a breeze.
Equipped with front and rear ball differentials for greater power transmission efficiency.
Race-proven reversible short suspension and TRF416 front and rear knuckles.
Includes body, wheels, tires, and Type 540 motor.
ESC, 2-channel R/C system, 7.2V battery and charger separately required.

How to get Tamiya 58409 1/10 Electric Car ARTA Garaiya (TB-03)? Click here!

Tamiya 54181 Option Parts Brushless Motor 01 18T

Are you new to R/C and looking at what kind of motor to install in your machine The next generation power units for radio control machines, brushless motors, now has a new inexpensive 18T motor joining the ever increasing line-up perfect for beginners. This motor has approximately the same power output as the Lightly-Tuned Motor 28T (Item 53983). The great thing about brushless motors is that you do not need to replace brushes and brush rings and no cleaning of the commutator is necessary making maintenance a breeze.

Can be used with any 1/10 R/C touring cars.
2270KV (KV denotes RPM per volt).
Input voltage: 6.6-7.2V.
Weight: 211g.
Sensorless design.
It is not suitable for big tire off-road, CR-01, and machines that require two motors.
Tamiya Brushless ESC 01 TBLE-01 (Item 54038) is required.
Lubricate bearings with Metal Bearing Lubricating Oil (Item 53508) to enhance performance and motor life.

How to get Tamiya 54181 Option Parts Brushless Motor 01 18T? Click here!

Tamiya 57783 1/10 XB - Expert Built Electric XB Skyline R32 (TT01D)

The world famous Skyline R32 GT-R now comes Ready-to-Run on the impressive driftspec TT-01D chassis and is waiting for you to test your drifting prowess.

This is a Ready-to-Run 1/10 R/C model of the famous Nissan Skyline GT-R (R32).
Polycarbonate body captures the GT-R's beautiful shape including parts such as the front and rear fenders, wing, and the hood's air outlet.
Shaft driven 4-wheel drive TT-01D chassis gives this electric R/C car superior control and handling.
Drift-spec modifications include special suspension tuning, full ball bearings, RS-540 sport-tuned motor, aluminum heat sink, CVA super mini shock dampers and short springs and adjustable upper arms.
Installed on the stylish silver wheels are Super Driftech tires (24mm, offset +2) which are made from resin and rubber compound specially designed for long-lasting drift action.
Comes equipped with LED Light Unit (TLU-01) and 2 x white LED's (Front) and 2 x red LED's (Rear).
Add separately available LED lights for a greater sense of realism.
Add Tamiya LED Light Control Unit (TLU-02) Item 53937 which allows up to 16 pairs of LEDs (total 32 LEDs) to be controlled.
Both front and rear light cases have two 5mm and four 3mm LED Light installation points.
ESC and Tamiya's brand new FM Radio Control System are included.
Battery pack and charger separately required.
A wide variety of Option Parts are separately available to further customize your machine.

How to get Tamiya 57783 1/10 XB - Expert Built Electric XB Skyline R32 (TT01D)? Click here!

Tamiya 57791 1/10 XB - Expert Built Electric XB DTM 08 Teile(TT01E)

Featuring throughout the 2008 DTM (German Touring Car Masters) season was the impressive No.6 Mercedes C Class entrant with famed driver Bernd Schneider at the helm.The car proved to be a highly competitive machine and went on to win first place at Round7 Nurburgring in Germany and third place at Round 9 Circuit de Catalunya in Spain.

1/10 Ready-to-Run R/C model of the 2008 C Class Mercedes AMG DTM.
Polycarbonate body captures the aggressive form of the Mercedes.
The eye-catching silver livery is the same color used by the Original Teile race car.
The improved steering linkage design features TA05 steering posts for sharper steering response.
Shaft driven 4-wheel drive TT-01 Type-E chassis gives this electric R/C car superior control and handling.
Equipped with LED Light Unit TLU-01. *It is also possible to install LED Light Control Unit TLU-02 (sold separately).
2 white and 2 red 5mm LED lights (Total 4) are included.
Both front and rear light cases have two 5mm and four 3mm LED Light installation points.
Includes ESC, type 540 motor, and 2-channel R/C system.
Battery pack and charger separately required.
A wide variety of Option Parts are separately available to further customize your machine.

How to get Tamiya 57791 1/10 XB - Expert Built Electric XB DTM 08 Teile(TT01E)? Click here!

Tamiya 57792 1/10 XB - Expert Built Electric XB GS400(TT01D TYPE-E)

The top class sports sedan Toyota Aristo, otherwise known as the Lexus GS, has attracted attention all around the world with its combination of stylish European looks and superb Japanese technology since it was first released in 1991. This R/C model comes on the new TT-01D Type E drift chassis and is equipped with Tamiya LED light unit TLU-01 and LEDs for headlights and taillights.

This is a Ready-to-Run 1/10 R/C model of the Lexus GS.
Length: 460mm, Width: 187mm, Height: 140mm.
Based on the lightweight and user-friendly TT-01Type-E chassis.
4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox.
Drift-spec modifications include special suspension tuning, full ball bearings, RS-540 sport-tuned motor, aluminum heat sink, CVA super mini shock dampers and short springs and adjustable upper arms.
Polycarbonate body and newly designed font and rear light cases capture the Lexus' beautiful form.
Installed on the stylish wheels are Super Driftech tires (24mm, offset +2) which are specially designed for long-lasting drift action.
Comes equipped with LED Light Unit (TLU-01) and 2 x white LED's (Front) and 2 x red LED's (Rear).
Add separately available LED lights for a greater sense of realism.
Add Tamiya LED Light Control Unit (TLU-02) Item 53937 which allows up to 16 pairs ofLEDs (total 32 LEDs) to be controlled.
ESC and Tamiya's brand new FM Radio Control System is included.
Battery pack and charger separately required.
A wide variety of Option Parts are separately available to further customize your machine

How to get Tamiya 57792 1/10 XB - Expert Built Electric XB GS400(TT01D TYPE-E)? Click here!

Tamiya 51386 Bodies Buggy Champ Body

The Buggy Champ s distinct body shape is reproduced with a durable plastic shell.
Screws & nuts, stickers, and two extra lights for the body are included.


How to get Tamiya 51386 Bodies Buggy Champ Body? Click here!

Tamiya 51388 Bodies Ford Bronco 1973 Body

Picture shows body painted, it comes clear and you must paint it.

Polycarbonate body captures the famous form of the Ford Bronco.
Metal plated grille and side mirrors are included.
Stickers and masking seals included.

How to get Tamiya 51388 Bodies Ford Bronco 1973 Body? Click here!

Tamiya 54171 Option Parts TA05v.2 Sep.Sus.Mounts 1X

These new aluminum Separate Suspension Mounts for TA05 Ver.II chassis machines can be used in place of the standard kit M5, 6, 8, 9 parts allowing you to further customize your toe-angle settings. When using them on the rear side of the front suspension mount, 5mmSuspension Ball (Item 50994) or 5mm Fluorine Coated Suspension Ball (Item 53709)must be used.

Aluminum Separate Suspension Mount (1X) X 2pcs.
Can be used with 1/10 R/C Cusco Dunlop Subaru Impreza (TA05 Ver.II) (Item 58435).

How to get Tamiya 54171 Option Parts TA05v.2 Sep.Sus.Mounts 1X? Click here!

Tamiya 54172 Option Parts TA05v.2 Sep.Sus.Mounts 1A-1XA

These new aluminum Separate Suspension Mounts for TA05 Ver.II chassis machines can be used in place of the standard kit M5, 6, 8, 9 parts allowing you to further customize your toe-angle settings. In addition, when replacing the suspension mounts you have the choice of two suspension ball installation pitches (1A-1XA). When using them on the rear side of the front suspension mount, 5mm Suspension Ball (Item 50994) or 5mm Fluorine Coated Suspension Ball (Item 53709) must be used.

Aluminum Separate Suspension Mount (1A-a) X 1pc.
Aluminum Separate Suspension Mount (1A-b) X 1pc.
Can be used with 1/10 R/C Cusco Dunlop Subaru Impreza (TA05 Ver.II) (Item 58435).

How to get Tamiya 54172 Option Parts TA05v.2 Sep.Sus.Mounts 1A-1XA? Click here!

Tamiya 54173 Option Parts TA05v.2 Sep.Sus.Mounts 1B-1XB

These new aluminum Separate Suspension Mounts for TA05 Ver.II chassis machines can be used in place of the standard kit M5, 6, 8, 9 parts allowing you to further customize your toe-angle settings. In addition, when replacing the suspension mounts you have the choice of two suspension ball installation pitches (1B-1XB). When using them on the rear side of the front suspension mount, 5mm Suspension Ball (Item 50994) or 5mm Fluorine Coated Suspension Ball (Item 53709) must be used.

Aluminum Separate Suspension Mount (1B-a) X 1pc.
Aluminum Separate Suspension Mount (1B-b) X 1pc.
Can be used with 1/10 R/C Cusco Dunlop Subaru Impreza (TA05 Ver.II) (Item 58435).

How to get Tamiya 54173 Option Parts TA05v.2 Sep.Sus.Mounts 1B-1XB? Click here!

Tamiya 54174 Option Parts TA05v.2 Sep.Sus.Mounts 1C-1XC

These new aluminum Separate Suspension Mounts for TA05 Ver.II chassis machines can be used in place of the standard kit M5, 6, 8, 9 parts allowing you to further customize your toe-angle settings. In addition, when replacing the suspension mounts you have the choice of two suspension ball installation pitches (1C-1XC). When using them on the rear side of the front suspension mount, 5mm Suspension Ball (Item 50994) or 5mm Fluorine Coated Suspension Ball (Item 53709) must be used.

Aluminum Separate Suspension Mount (1C-a) X 1pc.
Aluminum Separate Suspension Mount (1C-b) X 1pc.
Can be used with 1/10 R/C Cusco Dunlop Subaru Impreza (TA05 Ver.II) (Item 58435).

How to get Tamiya 54174 Option Parts TA05v.2 Sep.Sus.Mounts 1C-1XC? Click here!

Tamiya 54175 Option Parts TA05v.2 Sep.Sus.Mounts 1D-1XD

These new aluminum Separate Suspension Mounts for TA05 Ver.II chassis machines can be used in place of the standard kit M5, 6, 8, 9 parts allowing you to further customize your toe-angle settings. In addition, when replacing the suspension mounts you have the choice of two suspension ball installation pitches (1D-1XD). When using them on the rear side of the front suspension mount, 5mm Suspension Ball (Item 50994) or 5mm Fluorine Coated Suspension Ball (Item 53709) must be used.

Aluminum Separate Suspension Mount (1D-a) X 1pc.
Aluminum Separate Suspension Mount (1D-b) X 1pc.
Can be used with 1/10 R/C Cusco Dunlop Subaru Impreza (TA05 Ver.II) (Item 58435).

How to get Tamiya 54175 Option Parts TA05v.2 Sep.Sus.Mounts 1D-1XD? Click here!

Tamiya 51306 Bodies Raybrig NSX 2007 Body

This is the stock replacement body set for the Tamiya TA-05 IFS (inboard front suspension) kits.

Note: This body set is a new design from previous Honda NSX body sets 2006 and older. The 2007 Honda NSX sits very low and will ONLY fit TA-05 IFS chassis kits. It will not fit a standard TA-05 kit.

How to get Tamiya 51306 Bodies Raybrig NSX 2007 Body? Click here!

Tamiya 51375 Bodies Cusco Dunlop Impreza Body

Length: 453mm, Width: 191mm, Wheelbase: 257mm.
Polycarbonate shell captures the distinctive form of the Impreza.
Set provides several LED positions to illuminate your R/C car with lights.
H Parts (Wing): Black.
Silver metal plated lightcases.
Screws & nuts, stickers and masking seals included.
Can be used with TA05 series, TB-03, DF-03Ra, TT-01, & TT-01Type E chassis ma-chines.

How to get Tamiya 51375 Bodies Cusco Dunlop Impreza Body? Click here!

Tamiya 51221 Bodies NSX 2005 LW Body Finish

Tamiya presents this fully finished Raybrig NSX 2005 spare body set. Body is pre-painted with markings pre-applied.
* Compatible Chassis or Parts: TA05, TA04 (excluding short wheelbase chassis) TT-01, TGS, TNS, TB-02, TB Evolution IV, TRF415

How to get Tamiya 51221 Bodies NSX 2005 LW Body Finish? Click here!

Tamiya 50925 Bodies 1/10 Nissan 350Z Body

Tamiya 50925 1/10 Nissan 350Z Body

How to get Tamiya 50925 Bodies 1/10 Nissan 350Z Body? Click here!

Tamiya 50867 Spare Parts TA04 C Parts(F Upright)

Compatible Chassis or Parts: TA04.PRO, TRF414, TRF414MTA04

How to get Tamiya 50867 Spare Parts TA04 C Parts(F Upright)? Click here!

Tamiya 51232 Spare Parts F103GT Rear Wheel Mount L

Compatible Chassis or Parts: F103GT

How to get Tamiya 51232 Spare Parts F103GT Rear Wheel Mount L? Click here!

Tamiya 55105 Option Parts LF1100-6.6V Racing Pack M-size

Tamiya 55105 Option Parts LF1100-6.6V Racing Pack M-size

How to get Tamiya 55105 Option Parts LF1100-6.6V Racing Pack M-size? Click here!

Tamiya 53654 Option Parts TRF Crub Driver (2.5mm)

Tamiya 53654 Option Parts TRF Crub Driver (2.5mm)

How to get Tamiya 53654 Option Parts TRF Crub Driver (2.5mm)? Click here!

Tamiya 57790 1/10 XB - Expert Built Amemiya SGC-7(TT00E)

At the opening race of the 2008 Japanese Super GT Series, the rotary powered ORC Amemiya SGC-7 came out with a new silver livery and went on to take the season's first checkered flag. The ORC Amemiya SGC-7 went on to win two 3rd podium finishes at the4th and 6th rounds.

1/10 Ready-to-Run R/C model of the ORC Amemiya SGC-7.
Polycarbonate body is fully finished and captures the beautiful form of the SGC-7.
The improved steering linkage design features TA05 steering posts for sharper steering response.
Shaft driven 4-wheel drive TT-01 Type-E chassis gives this electric R/C car superior control and handling.
Light buckets not included. Purchase separately available LED Light Unit TLU-01 (Item 53909). *It is also possible to assemble with the separately available LED Light Control Unit TLU-02 (Item 53937) which allows up to 16pairs of LEDs (total 32 LEDs) to be controlled.
Includes ESC, type 540 motor, and 2-channel R/C system.
Battery pack and charger separately required.
A wide variety of Option Parts are separately available to further customize your machine.

How to get Tamiya 57790 1/10 XB - Expert Built Amemiya SGC-7(TT00E)? Click here!

Tamiya 58443 1/10 RC M-Chassis Electric M-05 Pro Chassis

Tamiya is proud to introduce the release of a new chassis to the very popular M Chassis range, the M-05 PRO chassis kit. The new chassis layout features new servo, receiver,and ESC positions for improved weight distribution and a lower center of gravity. Further-more, a 3-piece tie-rod steering linkage offers sharp cornering performance. This machine handles extremely well on straights and proves its worth with its excellent high-speed cornering ability. Body shells and numerous Option Parts for M-03 chassis machines canbe loaded onto this machine easily.

Battery pack, motor, and R/C unit are positioned lower than the tire height for optimum weight distribution and a low center of gravity. Three wheelbase lengths are possible (210mm/225mm/239mm) by simply switching the position of parts from the rear suspension. The chassis is compatible with M-03 chassis bodies, providing you with a wide range of body choice. The 60D radial tires with realistic tread pattern are mounted on the 11-spoke white wheels.

M-03R Aluminum Rear Uprights
Aluminum Horn for Hi-Torque Servo Saver
CVA Oil Damper Super Mini
Short Springs for TRF Dampers (Soft/Medium/Hard)
1150 Ball Bearings
850 Ball Bearings
Aluminum Ball Connectors (Blue)
Aluminum Ball Connector Nuts (Blue)
2.0mm Setting Spacer (Blue)
3.0mm Setting Spacer (Blue)
4mm Aluminum Flange Locknuts (Blue)
Hi-Torque Servo Saver

Specs
Chassis Length: 299mm (when with 239mm wheelbase)
Chassis Width: 165mm
3 Adjustable Wheelbase Lengths (210mm/225mm/239mm)
Tread (Front and Rear): 138mm
Front Wheel Drive
3-bevel Differential Gear
3-piece steering linkage
Front and Rear Double Wishbone Suspension
Front and Rear CVA Oil Damper Super Mini
Gear Ratio=5.8 :1
Tire Width/Diameter (Front and Rear): 25/59mm

Required Items
Electronic Speed Controller
2-channel R/C unit with ESC
8xAA batteries for transmitter
7.2V Stick Battery
7.2v Charger
Tools

How to get Tamiya 58443 1/10 RC M-Chassis Electric M-05 Pro Chassis? Click here!

Tamiya 56028 1/16 RC Tank with Controller Set Russian KV-1 w/Option Kit

Named after the Soviet defense commissar Kliment Voroshilov, testing of the KV along with 3 multi-turreted tanks the T-35, T-100, and the SMK began in September 1939. These tanks were soon battlefield tested during the ""Winter War"" from December the same year. Battlefield experience revealed the SMK and T-100's poor mobility, while the KV's good performance led to its adoption as the Soviet Army's next generation heavy tank. During WWII, the KV-1 heavy tank proved to be a difficult customer to handle for the invading German Army and forced them to build stronger and heavier tanks

This is a 1/16 R/C Russian Heavy Tank KV-1 Full-Option Set kit.
Length: 423mm, Width: 210mm, Height: 170mm, Weight: 3,500g.
The KV-1's distinctive form is accurately reproduced.
Dual gearboxes can operate together or individually for realistic tank movement.
Includes DMD Control Unit (T-08) and DMD Multi-Function Unit (MF-06) which enables turret rotation, gun elevation/depression, and realistic light and sound action at your fingertips.
Onboard speaker reproduces realistic engine sounds.
Main gun and machine gun firing accompanied by LED flashes for greater realism.
Install ITEM 53447 1/16 R/C Tank LED Battle System (sold separately) for exciting 1vs1or team battles with other similarly equipped Tamiya R/C tanks.
Motor and 4-channel R/C system included.
Battery pack & charger are separately required.
This Russian heavy tank would look fantastic facing off other Tamiya 1/16 R/C tanks such as the previously released 1/16 German Jagdpanther Late Version Full-Option Kit (Item56024) and 1/16 German Panzerkampfwagen IV Ausf.J Full-Option Kit (Item 56026).

How to get Tamiya 56028 1/16 RC Tank with Controller Set Russian KV-1 w/Option Kit? Click here!

Tamiya 57787 1/10 XB - Expert Built Fiat 500

1957 saw Italian car manufacturers Fiat release the first Nuova 500 which went on to be a very popular little car. 50 years later in 2007, Fiat has enjoyed amazing success with their modern interpretation of the vehicle, the Fiat 500. The Fiat 500 was enthusiastically received by the consumer market not only in Italy but worldwide, with the first production selling out lot within 3 weeks.

About the Model
This is a 1/10 ready-to-run model of the Fiat 500.
The Fiat 500 s body is accurately reproduced with a vacuum formed polycarbonate shell.
New parts for side mirrors and wheels.
Type 540 motor is installed on the excellent M-03M Chassis.
Front mounted motor; 2WD front wheel drive.
Tread pattern rubber tires with inner sponge included.
4-wheel independent double-wishbone suspension with friction dampers provides excellent handling.
Includes ESC (TEU-101BK) and 2-channel R/C system.
Battery pack & charger separately required.
A wide range of Grade-Up parts are available for further customizing your machine.

How to get Tamiya 57787 1/10 XB - Expert Built Fiat 500? Click here!

Tamiya 58433 1/10 Electric Car C-Class DTM 08 Teile (TT01E)

Featuring throughout the 2008 DTM (German Touring Car Masters) season was the impressive No.6 Mercedes C Class entrant with famed driver Bernd Schneider at the helm.The car proved to be a highly competitive machine and went on to win first place at Round 7 Nurburgring in Germany and third place at Round 9 Circuit de Catalunya in Spain.

This is a 1/10 scale R/C assembly model kit of the 2008 Mercedes Benz AMG DTM C Class.
The polycarbonate body accurately captures the impressive form of the car.
Shaft driven 4-wheel drive TT-01 Type-E chassis gives this electric R/C car superior control and handling.
Comes with racing slick tires.
2 white and 2 red 5mm LED lights (Total 4) are included.
Comes with LED Light Unit TLU-01 (Item 53909). *It is possible to assemble with the separately available LED Light Control Unit TLU-02 (Item 53937) which allows up to 16pairs of LEDs (total 32 LEDs) to be controlled.
ESC and type 540 motor included.
2-channel R/C system, battery pack & charger are separately required.
A wide variety of Option Parts are available for you to further customize your machine.

How to get Tamiya 58433 1/10 Electric Car C-Class DTM 08 Teile (TT01E)? Click here!

Tamiya 58436 Off Road Electric Ford Bronco 1973

The Ford Bronco is a famous American 4X4 off-road vehicle. This 1970's model was among the first series called ""Early Bronco"" which were produced during 1965-1977. Three types of bodies were released; the fully-open ""Roadster,"" the single cabin pick-up ""Utility,"" and the ""Wagon"" which had a resin roof. The body featured triangular protrusions on both sides on the curved front hood which worked well as a guide for drivers to accurately measure the body size while driving. The front suspension features coil springs combined with the rigid axle, which was a first for mass-produced 4X4 vehicles and works well both on-road and off-road. The Bronco is still greatly popular around the world, particularly in America, where many are used as cross-country and rock crawling vehicles.

About the model:
This is a 1/10 scale R/C assembly kit model of the Ford Bronco 1973.
Comes on the excellent CR-01 crawling chassis.
The newly designed polycarbonate body captures the Bronco's classic form.
Newly designed metal plated H parts (Grille, side mirrors, and light covers) are made of durable ABS resin.
The Bronco comes equipped with CR-01 Cliff Crawler Tires (Item 54117).
Type 540 motor included.
A wide range of Hop Up parts are available for you to further customize your machine.

Specs
Full Ball Bearings
Planetary gearbox comes with20T pinion gear for a 40.5:1 gear ratio
Requires ESC and 2ch Radio w/1 servo
Requires Paint and Assembly

Do not use the TEU-101BK (Item# 45029) with CR-01 Crawlers. The 101BK will overheat easily with the rigors of crawling. We'd recommend the TEU-302BK (Item# 45028) for use with the CR-01

How to get Tamiya 58436 Off Road Electric Ford Bronco 1973? Click here!

Tamiya 58434 1/10 Electric Car Calsonic IMOUL GT-R TB-03

About the Model
Bathtub frame comes with a motor cooling duct to improve heat dissipation for better performance.
In-board Front Suspension system features horizontally-mounted front dampers to enable a low-nose profile to mount the new-mold aerodynamic polycarbonate body shell.
The body shell is also compatible with TA05-IFS chassis
Newly-designed one-piece aluminum motor mount makes changing and adjusting gears a breeze.
Equipped with front and rear ball differentials for greater power transmission efficiency.
Race-proven reversible short suspension and TRF416 front and rear knuckles.
Includes body, wheels, tires, and Type 540 motor.
ESC, 2-channel R/C system, battery pack and charger separately required.

The 2008 Japan Super GT Series saw Team Impul race with the new GT-R with teamdrivers Tsugio Matsuda and Sebastian Philippe at the helm. Team Impul have continuedusing the same highly famous blue livery that their previous Nissan Skylines sported. Atthe 2nd round at the Okayama International Circuit, Team Impul won second place behindthe Xanavi Nismo GT-R (Depicted in item 24308) giving the GT-Rs an incredible 1-2 finish.At round 6 at Suzuka, Team Impul recorded its first win of the season.

How to get Tamiya 58434 1/10 Electric Car Calsonic IMOUL GT-R TB-03? Click here!

Tamiya 58431 1/10 RC Formula One Electric F104 PRO w/Body

With the release of the limited edition 1/10 R/C F103 15th Anniversary Chassis Kit (Item 84056) and F103RM Chassis cars, popularity in this type of R/C model has swelled all around the world. Tamiya is proud to release the newly designed F104 chassis. Events such as Tamiya Grand Prix now feature F103 & F104 class races.

The first edition of the F104 chassis kit comes in PRO specifications and uses top-quality carbon fiber parts for a beautiful finish.
The car features front & rear wings and an original body, which produce a great scale realism.
Tire size and body dimensions mimic those seen in races.-The battery is longitudinally-mounted for a slim body design.
The 2WD Direct Drive system has excellent acceleration qualities and is very reliable.
The front suspension features a link-type coil spring with the rear suspension having a friction plate & a T-bar set up with a TRF damper.
A part of the new design is the aluminum diff housing. Even if your wheels are removed,the differential will hold together allowing easy maintenance.
The height adjustable rear gear case has been designed to match the new tire dimensions.
The isometric steering rod links up well with the longitudinally-mounted steering servo for excellent control.
The car features a low number of parts allowing for simple operation and easy maintenance.-Type 540 motor included.
ESC, 2-channel R/C system, battery pack & charger are separately required.


How to get Tamiya 58431 1/10 RC Formula One Electric F104 PRO w/Body? Click here!

Tamiya 58432 1/10 Electric Car Aristo w/LED Lgiths(TT-01 Type E Drift)

The top class sports sedan Toyota Aristo, otherwise known as the Toyota Lexus GS has attracted attention all around the world with its combination of stylish European looks and superb Japanese technology since it was first released in 1991. This R/C model comes on the new TT-01Type E Drift chassis which and is equipped with Tamiya LED light unit TLU- 01, headlights, and taillights which realistically replicates the Aristo s lighting dynamics.

About the Model
Length: 460mm, Width: 187mm, Height: 140mm.
Based on the lightweight and user-friendly TT-01E chassis for effortless assembly.
4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox.
Drift-spec modifications include special suspension tuning, full ball bearings, RS-540 sport tuned motor, aluminum heat sink, CVA super mini shock dampers and short springs and adjustable upper arms.
Polycarbonate body and newly designed font and rear light cases capture the Aristo s beautiful form.
Installed on the stylish wheels are Super Driftech tires which are specially designed for long-lasting drift action. (24mm, offset +2)
Includes Electronic Speed Controller (TEU-101 BK).
Includes LED Light Unit (TLU-01) and 2 x white LED's (Front) and 2 x red LED's (Rear).
Add separately available LED lights for a greater sense of realism.
Add Tamiya LED Light Control Unit (TLU-02) Item 53937 for more control of light operations.
Wide variety of tune-up parts are separately available to further customize your machine.
2-channel R/C system, battery pack and charger separately required.


How to get Tamiya 58432 1/10 Electric Car Aristo w/LED Lgiths(TT-01 Type E Drift)? Click here!

Tamiya 54150 Option Parts TB-03 Alu. Motor Mount

This new motor mount is made from aluminum, providing extra strength and precision to your TB-03 machine.
The blue adonized aluminum also looks cool as a dress up part.
Can be used with any TB-03 machine.

How to get Tamiya 54150 Option Parts TB-03 Alu. Motor Mount? Click here!

Tamiya 53365 Option Parts TG10 Alu.Racing Steering Set

Compatible Chassis or Parts: TG10-Mk.1, TB-01

How to get Tamiya 53365 Option Parts TG10 Alu.Racing Steering Set? Click here!

Tamiya 53519 Option Parts F201 Aluminum Locker Arm Set

Compatible Chassis or Parts: F201

How to get Tamiya 53519 Option Parts F201 Aluminum Locker Arm Set? Click here!

Tamiya 54176 Option Parts Formula-Tuned Motor (32T)

The Formula-Tuned Motor (32T) is a high performance electric motor featuring replace-able standard type brushes to ensure a long running life. The end bell features special vents for maximum motor cooling and incorporates a detachable inboard capacitor.

Features optimum power output for direct-drive 2WD chassis such as F103 & F104.
Compatible with Item 53581 Racing Motor Brush Set (Standard Type).
The motor produces 14,000 rpm and 39mN/m of torque (7.2V).

How to get Tamiya 54176 Option Parts Formula-Tuned Motor (32T)? Click here!

Tamiya 54163 Option Parts F104 Carbon Lower Deck

Not only does carbon look cool, but it also provides your F104 machine with overall improved strength.

Carbon lower deck x 1pc.
Carbon lower deck is 3.2mm thick.
Can be used with F104 Chassis machines.

How to get Tamiya 54163 Option Parts F104 Carbon Lower Deck? Click here!

Tamiya 53950 Option Parts TGM-04 Zerol Bevel Gear

This special type of spiral bevel gear features curving teeth for higher strength and efficiency than straight bevel gear. Use in place of kit included straight bevel gear.
Compatible chassis: TGM-04, TGM-03

How to get Tamiya 53950 Option Parts TGM-04 Zerol Bevel Gear? Click here!

Tamiya 54164 Option Parts F104 Carbon Upper Deck

Not only does carbon look cool, but it also provides your F104 machine with overall improved strength.

Carbon upper deck x 1pc.
Carbon upper deck is 2.0mm thick.
Can be used with F104 Chassis machines.

How to get Tamiya 54164 Option Parts F104 Carbon Upper Deck? Click here!

Tamiya 54147 Option Parts TB-03 Carbon Rein. Chassis

This new reinforced lower deck has been molded with carbon fiber-reinforced nylon resin to give your TB-03 machine more strength and durability and provides more protection to your machine in the event of a crash. It is a perfect match for 23T and other high speed motors and improves your machines road traction with its greater rigidity.
*Can be used with any TB-03 machines.

How to get Tamiya 54147 Option Parts TB-03 Carbon Rein. Chassis? Click here!

Tamiya 54149 Option Parts DB01 Alu.Racing Steering(Blue)

These high precision aluminum steering arms will provide you with high durability and excellent control of your machine.
Both steering arms have 850 ball bearings.
Can be used with any DB01 chassis machines.

How to get Tamiya 54149 Option Parts DB01 Alu.Racing Steering(Blue)? Click here!