Tamiya 50170 Spare Parts Nylon Band (Updated at 2010/08/19 20:30)

Tamiya 53824 Bodies Subaru Legacy B4 2.0 Body

Introducing a second version of the popular Subaru Legacy B4 as used by champion Tamiya R/C driver Surikarn Chaidajsuriya. The Version 2 Legacy includes masking seals. Compatible Chassis or Parts: Most on-road touring car chassis

How to get Tamiya 53824 Bodies Subaru Legacy B4 2.0 Body? Click here!

Tamiya 53292 Option Parts TL01 Ball Bearing Set

In the 2002 WRC season Team Ford team began with a bang, as the Focus RS WRC 02 driven by Carlos Sainz took 3rd place in the Monte Carlo and Swedish Rallies. Requires a 2-channel radio and operates on a 7.2V battery

Basic Specifications
-Chassis Type: TL-01
-Scale: 1/10
-Length: 16.45 inches (418mm)
-Width: 7.28 inches (185mm)
-Wheelbase: 10.11 inches (257mm)
-Front Tread: 6.18 inches (157mm)
-Rear Tread: 6.18 inches (157mm)
-Weight: 3.90 lbs. (1767g)
-Chassis: ABS Monocoque
-Suspension: 4 wheel independent
-Damper Type: Plastic coil over friction
-Drive Train: 4WD shaft drive
-Gear Ratio: 7.96:1
-Differential Type: Bevel Gear
-Engine: Electric 540
-Speed Controller: 3 Step F&R Mechanical
-Wheels & Tires: 10 spoke / Slick
-Body Type: Clear/Polycarbonate
-Steering Tie Rod: 2 part
-Suspension: front and rear double wishbone
-Damper: friction damper
-Transmission type: shaft drive mid-ship full-time 4WD
-Diff. gear system F/R: 3-Bevel Diff
-Tire width F/R: both 27mm
-Tire diameter F/R: both 64mm
-Tread pattern F/R: slicks
-Power source: 7.2V battery

Spare Parts & Hop Up Options
-53467 - TL-01 & FF02 Long suspension arm set
-53440 - On-road tuned hard spring set
-53418 - TL-01 Universal shaft (2pc.)
-53347 - 3x3mm spring set screws (10pc.)
-53346 - TL-01/M03 quick release battery holder
-53345 - TL-01/M03 toe-in rear upright
-53342 - TL-01 speed-tuned gear set
-53333 - Touring car tuned spring set (short)
-53324 - TL-01 stabilizer set
-53323 - TL-01 carbon propeller shaft
-53322 - TL-01 hollow carbon gear shaft
-53303 - TL-01 adjustable upper arm set
-53301 - TL-01 stainless steel suspension shaft set
-53300 - TL-01 turnbuckle tie-rod set
-53295 - Tire inner foam
-53292 - TL-01 ball bearing set
-53280 - TA03 super low friction damper set (4pc.)
-53267 - TA03 ball differential
-53163 - On-road tuned spring set
-53162 - 4mm anodized aluminum flanged lock nuts (black)
-53161 - 4mm anodized aluminum flanged lock nuts (gold)
-53160 - 4mm anodized aluminum flanged lock nuts (red)
-53159 - 4mm anodized aluminum flanged lock nuts (blue)
-53144 - Touring & rally car bushing & ball connector set
-53141 - 4WD touring & rally car lightweight king pins
-53095 - 3x10mm titanium tapping screw (10pc.)
-53056 - Pin type wheel adapter
-50357 - 22T, 23T AV pinion gear set (only the 23T gear in this set is compatible with the TL-01)
-50356 - 20T, 21T AV pinion gear set (only the 21T gear is compatible with the TL-01)

ELECTRIC KITS REQUIRE:
(unless stated differently above)
-Radio: 2-Channel with servo(s)
-Battery: 6-cell flat with standard Tamiya connector
-Charger: AC/DC timed or peak for 6-cell battery
-Paint: PS for Polycarbonate/TS for ABS
-Misc. Items: Building and track equipment

How to get Tamiya 53292 Option Parts TL01 Ball Bearing Set? Click here!

Tamiya 50937 Spare Parts F201 Front Tire (w/inner Sponge)

This is a pair of F201 Front Tires with Inner Sponge from Tamiya.

FEATURES:

Usable with F201 chassis cars.
Grooved tread pattern.
Blackwall rubber tires.
Dark gray inner sponges.
Front tires.

INCLUDES:

Two F201 Front Tires
Two Inner Sponges

REQUIRES: Wheels, CA Glue

SPECS:

Inner Diameter: 36mm
Outer Diameter: 61mm
Thickness: 11mm
Width: 30mm

How to get Tamiya 50937 Spare Parts F201 Front Tire (w/inner Sponge)? Click here!

Tamiya 53217 Option Parts Hard Joint Cup (for Ball Diff)

These are replacement parts which will fit many Tamiya cars and trucks.

Features: Metal gear box joints with splined shafts. These are sometimes also
referred to as outdrives and are the parts which drive the dogbones
(also often called swingshafts). The appropriate Tamiya instruction
manual must be checked to determine whether or not these joints will
work.

Includes: (1) left joint
(1) right joint

Requires: Nothing else required

How to get Tamiya 53217 Option Parts Hard Joint Cup (for Ball Diff)? Click here!

Tamiya 51091 Spare Parts TB Evolution IV Propeller Shaft

RC TB Evo IV Propeller Shaft

How to get Tamiya 51091 Spare Parts TB Evolution IV Propeller Shaft? Click here!

Tamiya 53825 Option Parts TB-Evo4 2.6mm Sus. Shaft

RC Stainless Sus Shaft Set - TB Evolution IV

How to get Tamiya 53825 Option Parts TB-Evo4 2.6mm Sus. Shaft? Click here!

Tamiya 56016 1/16 RC Tank M26 Pershing w/Option

Things just got realer. Starting with the 1/16 R/C sensation of the Tiger I Early Production, and then with the M4 Sherman 105mm Howitzer, Tamiya continues to develop its 1/16 R/C Tank Series. The third full-option kit to make its appearance is the U.S. Medium Tank M26 Pershing that fought during the end of WWII and throughout the Korean War. Tamiya keeps increasing its knowledge about R/C tanks and improving the realism of their movement and sound to make their appearance even more striking.
Two-channel or four-channel RC unit is necessary to operate this kit. 7.2V Tamiya Racing Pack (or equivalent) and charger are also required.

How to get Tamiya 56016 1/16 RC Tank M26 Pershing w/Option? Click here!

Tamiya 51054 Spare Parts TRF415 Front Oneway Pulley 35T

RC TRF415 Front One-Way Pulley - 35T

How to get Tamiya 51054 Spare Parts TRF415 Front Oneway Pulley 35T? Click here!

Tamiya 50911 Spare Parts TB Evo.Bevel Pinion Gear

This is the Bevel Pinion Gear Set for the Tamiya TB Evo. This mounts inside the gear case and drives the ring gear.

FEATURES:

Nylon Construction
Black in Color

INCLUDES: Two Bevel Pinion Gears

REQUIRES: Tamiya TB Evo

How to get Tamiya 50911 Spare Parts TB Evo.Bevel Pinion Gear? Click here!

Tamiya 50170 Spare Parts Nylon Band

Nylon Band replacements for Tamiya kits.

PACKAGE INCLUDES:

2-Black Nylon Bands (Length: 9-5/8"" Width: 1/4"")
2-Plastic Caps
6-Bead Nylon Bands (Length: 4"" Width: 3/32"")
2-White Nylon Bands (Length: 3-1/4"" Width: 3/32""

How to get Tamiya 50170 Spare Parts Nylon Band? Click here!